The following models have been released and you can purchase now.
We only have one of each left so don’t miss out.
ACD18H17C $250
ACD18H17E $250
The following VN models have been released and you can grab yours now. Get in quickly as we only have a couple of each left now.
1991 ATCC HOLDEN VN COMMODORE SS GROUP A PETER BROCK
B182706J $250
This 1:18 Scale model has been produced in die-cast with fully opening parts, highly detailed engine bay, interior and undercarriage along with beautiful finishing throughout. It features new tooling unique to the model like the engine induction and various interior parts. Coming in a limited edition of 756 with a numbered Certificate of Authenticity, it forms part of the Biante Peter Brock Collection and is one that shouldn’t be missed.
HOLDEN VN SS GROUP A COMMODORE – DEVELOPMENT CAR – ALPINE WHITE
B182706G $250
The VN Group A mould is perhaps one of the finest examples of an Australian die-cast model produced by Biante. With standard features you would expect from us such as fully opening parts, highly detailed engine bay, interior, exterior and undercarriage combined with even higher detailed characteristics including fine seat flocking in the interior, raised “Goodyear Eagle” lettering on the tyre walls and authentic bonnet hinges and gas struts, this is an amazing limited edition model car. Limited to 600.
The following two models have been announced and we are accepting preorders now. Please use the links below to place your preorders and you must include your phone number.
18730 $285
Preorder 1/18
18729 $285
Preorder 1/18
This is the latest Johnson Mustang release and you can buy your 1:18 scale model now.
The model number is 18715 and it is priced at $270.
Grab one now as they are limited to 750 and we only have a couple left.
In 1984 Dick Johnson envisioned the Ford Mustang GT as a car that could be competitive under the new Group A racing rules scheduled for 1985. He tracked down two in Germany and took them back to his Queensland workshops for an engine rebuild and thorough race fitout.
Although Johnson described the car as one of the best handling and braking cars he has ever driven, the lack of engine power meant that during the 1985 ATCC season the car was not as competitive as he’d hoped.
After qualifying 3rd for the 1985 Bathurst 1000, Dick Johnson and Larry Perkins finished seventh in their Palmer Tube Mills Ford Mustang GT, four laps down from the winning John Goss Jaguar XJ-S.
“The Mustang was a great little car. It’s just unfortunate the power-to-weight ratio was not the most desirable, but the handling, braking and stability was superb. It was a damn good car…” – Dick Johnson.
The following Holdens have just been released and you can purchase yours now. Not many left so grab one quickly! Both these models are 1:18 scale.
A73390 $270
Produced in fully opening diecast, this model is set to an exclusive limited edition of 852 comes with a numbered Certificate of Authenticity.
A73466 $250
This model is a faithful replication of its 1:1 counterpart and some of the features include fully opening parts, realistic interior, high quality paint finishing, pose-able steering and will be an exclusive limited edition of 804 with a numbered certificate. If you’re a Monaro fan or a classic Australian road car collector then this is another model that should be added to your collection.
This 1:18 i s a new announcement from Classic Carlectables and can be preordered now.
Email Us to place your preorders and include your phone number please.
Preorders close 24th September.
18728 $285
Features Include:
Early in 1972 Ford released the XA GT Falcon in sedan and hardtop versions. It was the first Falcon to be totally designed by Australians as production of the Falcon in the US had ceased some 18 months earlier. The XA was the biggest Falcon yet, with the boldest styling, designed for wider appeal with its less aggressive look and creature comforts.
18727 $285
This 1:18 scale model has been announced and you can Preorder Now
Preorders close 22nd September and a phone number must be supplied.
Highly detailed interior & exterior
Opening bonnet, boot & doors
Poseable front tires
Limited edition
Numbered certificate of authenticity
For the 1970 Bathurst race it was the first time drivers could nominate to drive the entire race distance without a co-driver. The number one driver was Allan Moffat who was to drive solo, as allowed by the new rules. Moffat was the fastest in qualifying with a lap time of 2m 49.3s – good enough for pole position for Sunday’s race. When the starter’s flag dropped, it was Allan Moffat in first position going up Mountain Straight. At the end of Conrod Straight, Colin Bond’s XU-1 Torana outbraked the GT-HO of Moffat and went into the lead. Moffat would regain the lead on lap five. After the first round of pit stops, Moffat was in the lead and by the second round of pit stops he was still leading. Nearing the end of the race, Bruce McPhee was closing in on Moffat who was slowing, but could only hope for second position. Moffat was to greet the chequered flag in first outright, after 130 laps, to become the first driver to win the event without a co-driver.
This 1:18 scale model has just been announced by Classic Carlectables and you can preorder it now.
It is model number 18726 and is priced at $285.
Click to preorder
Please note a phone number is essential.
Preorders close 8th September 2020.
The Holden Torana is one of those iconic, Australian muscle cars born of an era where the Win On Sunday, Sell On Monday mantra from local car manufacturers was prevalent in a golden era of both motoring and motor sport for the country.
While it quickly became a favourite for racing enthusiasts due to its impressive power to weight ratio, the road cars also became very popular given their sleek, sporty looks and bold colour options available at the time.
This model will be produced in die-cast with fully opening parts, highly detailed engine bay, interior and undercarriage along with beautiful finishing throughout. Features include opening doors and bonnet.
Full interior, engine and chassis detail.
This model has just been released and you can buy yours now.
Holden HT Monaro 1970 ATCC Winner 50th Anniversary Gold Livery Norm Beechey
The model number is 18710 and it is priced at $270
Stock is very limited so get in quickly so you don’t miss out.
This model is limited to 750 so it will it will be very sought after.
The following 1:18 scale models have been announced and can be preordered now.
Preorders close 14th August and a phone number must be supplied.
Please use the links provided below to place your preorders. Do not reply to this email as it comes from an unattended address.
2019 Sandown Retro Milwaukee Racing Davison/Davison
ACD18F19H $250
1:18 scale diecast with opening parts and detailed interior
2019 Sandown Retro Supercheap Auto Mostert/Moffat
ACD18F19J $250
1:18 scale diecast with opening parts and detailed interior
2019 Townsville Camo Livery Erebus Penrite David Reynolds
ACR18H19J $230
