Tag Archives: 1:18 Resin Model,

April New Announcments from Biante

The following models have just been announced and you can place your preorders now.

Preorders close Friday 17th April 2020 and a phone number is required.

Holden HQ Sandman – Barbados Green

Limited to 804 so first in best dressed.

A73384 $300 Email Us

HOLDEN VC COMMODORE SL/E
NOCTURN BLUE OVER ATLANTIS BLUE

B182704F $225 Email Us

FPV BF MK II GT
OCTANE

BR18309B $225 Sealed Body Resin Email Us

Moffat Tribute Edition #9 2019 Ford Mustang – Tickford

Tickford have produced a stunning Mustang tribute car. This potent car bare’s the livery of Allan Moffats most iconic 1969 Trans Am Mustang. This vehicle was mechanically enhanced and special modern wheels were produced to replicate the minilite race wheels. This model will be produced in high quality resin and have a sealed bodyshell.

Moffat Tribute Edition #9 2019 Ford Mustang – Tickford

DDAUS030 $320

Preorder Now

A phone number is required please.

Preorders close Friday 3rd April 2020.

This model is due for release towards the end of the year.

 

1:18 Holden November New Announcements from Biante

The following 1:18 scale models have been announced and can be preordered now.

Preorders close 18th November and a phone number is required.

Please use the links below to place your preorders. If you reply to this email we will not get it.

1:18 Diecast Model

HOLDEN HJ SANDMAN PANEL VAN MANDARIN RED

A73368 $270

*Please note only 804 pcs made. Orders will be prioritised on a first in, first served basis*

Preorder Now

The 1:18 Scale Mandarin Red HJ Sandman will be produced in die-cast with fully opening parts, high detail and beautiful finishing throughout. This will be Biante’s 3rd HJ Sandman Panel Van release after previously releasing the Contessa Gold and Windsor Blue versions.
Please note: There are no surfboards included with this model unlike previous 1:18 Sandman models.

1:18 Diecast Model

FORD XB FALCON HARDTOP

A72882 $270

Preorder 1/18

Ford XB Falcon Hardtop Mcleod Ford Horn Car option in Onyx Black with red accents.

Some Ford dealers such as McLeod Ford in Sydney (who were known for their “Horn” cars) chose to add accessories such as front and rear spoilers, or to modify the interior seating to feature colourful cloth or vinyl inserts. This particular edition is based on one of those cars.

Produced in composite with fully opening parts, high detail and coming in a limited edition with a numbered certificate of Authenticity, this model is a must have for Ford fans and shouldn’t be missed.

1:18 Diecast Model

HOLDEN HT MONARO GTS 350 DAYTONA BRONZE

A73417 $270

*Please note only 900 pcs made. Orders will be prioritised on a first in, first served basis*

Preorder 1/18

This 1:18 Scale replica of the HT Monaro is a stand-out model. Produced in die-cast by Autoart with their usual high attention to detail and finishing, featuring fully opening parts, highly detailed engine bay and interior. Both the interior and exterior colour options have been finished beautifully making this a fine example of a classic Australian car.

1:18 Resin Model

HSV GEN F SENATOR NITRATE SILVER

AR81701 $250

Preorder 1/18
Resin sealed body.

Despite being a sealed body model, no shortcuts have been taken with replicating the interior of this model. Upon looking through the clear windows you can see a very high attention to detail right down to the dashboard instrumentation and logos. Last but not least, the Nitrate Silver colour scheme simply looks phenomenal and finishes the model superbly well.

The 1:18 Scale Gen-F Senator is a must have model for Holden and HSV fans alike. It will be produced in a limited edition number and will come with a numbered Certificate of Authenticity.

1:18 Diecast Model

HOLDEN VF COMMODORE SSV JUNGLE GREEN

B182716G $195

Preorder 1/18

This new 1:18 SS-V Redline model has been produced in die-cast with fully opening parts, which should be welcome news for many die-cast model car collectors. Additionally, the model will have numerous features including a highly detailed engine bay, faithfully replicated interior, nicely replicated 19” staggered wheels with road going tyres, photo etched parts, beautifully presented chrome detailing and outstanding finishing all round. It’s an exceptional model of a car that will one day be considered an absolute classic and one for the history books.
As with all Biante 1:18 scale models, this model will be produced in a limited edition and will come with a numbered Certificate of Authenticity.

Ford Mustang 1968 ATCC Winner Ian ‘Pete’ Geohegan

1:18 Resin Model

AC8003 $295

Please use the link below to place your preorder.  Don’t reply to this email as it comes from an unattended address.

To place your preorders Email Us  and please include your phone number

Resin Sealed body model.

Preorders close 18th November.

Ian ‘Pete’ Geoghegan’s victory in the 1968 Australian Touring Car Championship marked the end of an era given it was the last time in history that the title of Australian Touring Car Champion was decided by a single race, rather than a series of races.
The victory also gave Geoghegan his third consecutive ATCC crown, having won the 1966 title at Bathurst and the 1967 championship at Lakeside, his first in the Ford Mustang that ultimately took him to three title wins in a row covering ’67, ’68 and 1969.
The 1968 ATCC was decided by a single 34 lap race around the Warwick Farm circuit in Sydney on September 8, 1968 and Geoghegan established himself as the man to beat by setting pole position, his 1m42.8s lap six-tenths faster than the Chevrolet Camaro of 1965 champion Norm Beechey.
The duo was joined on the front row of the unique three-wide front row of the grid by Bob Jane’s Mustang with a total of seven Mustangs in the 30-car field.
But there was only one Mustang to beat and that was Geoghegan’s.
He bolted straight into the lead at the start with his rivals unable to slow him down. Jane’s engine ended up going on lap nine and three laps later Beechey coasted to a halt, also with engine issues.
That left Geoghegan unchallenged and he went on his way, his trouble-free race taking him to his fourth Australian Touring Car Championship victory.
At the end of the 123-kilometre race he crossed the line 1m31-seconds in front of the Morris Cooper S of local New South Wales driver Darrell King with the Porsche 911S of Alan Hamilton the only other car on the lead lap in third place.
Geoghegan had led all 34 of the laps in the race and set the fastest lap of 1m43.0s, setting a pace good enough to win but with plenty in reserve had he been challenged.
Proof of that came in a support race later in the day where he broke Beechey’s touring car lap record and set a 1m40.7s lap!
Geoghegan would go on to win the 1969 championship – again at the wheel of the same Mustang that he’d taken to victory in 1967 and 1968 – and became the first five-time Australian Touring Car Champion in history in doing so.
He was inducted into the Supercars Hall of Fame in 1999 and passed away in November 2003.

MERCEDES-AMG GT3 – TEAM VODAFONE – 2019 LIQUI-MOLY BATHURST 12 HOUR

MERCEDES-AMG GT3 – TEAM VODAFONE – 2019 LIQUI-MOLY BATHURST 12 HOUR LOWNDES/WHINCUP/van GISBERGEN

 

This 1:18 scale model has been released and we have one left for you.

18SP078 $270

Grab it now so you don’t miss out.

A powerhouse when it came to the 1000-kilometre Supercars race, Roland Dane’s squad didn’t have to look far to fill the three slots in its driving roster.
Shane van Gisbergen, Jamie Whincup and Craig Lowndes had amassed between them 11 Bathurst 1000 wins, 11 Supercars Championships, and four Bathurst 12 Hour wins. To top it off, former team sponsor Vodafone came on board as primary sponsor of the #888 Mercedes AMG GT3, run in conjunction with Australian GT squad Scott Taylor Motorsport.

Produced in resin by Spark, the attention to detail will be of their usual excellent standard with stunning detailing and paintwork. These models should not be missed.
They will be an exclusive limited edition number of 548  and will be available for only a short period once released.

1969 Sidchrome Racing Mustangs Jim Richards

The following Mustangs driven by Jim Richards have been released and you can purchase yours now.

Hurry, while stock lasts.

 

1:18 Resin Model

1969 Ford Mustang Boss 302 #12 Jim Richards Sidchrome Racing Big Fenders

1:18 Resin sealed body DDA18008 $375

Only one left now.

 

1:18 Diecast Model

1969 Ford Mustang Boss 302 #102 Jim Richards Sidchrome Racing

1:18 Diecast Model DDA1801829 $255

Limited edition with COA signed by Jim Richards.
Fully detailed with opening hood and doors.
Diecast metal body.
Plumbed and wired engine.
Poseable steering.
Rubber tires.

1967 ATCC WINNER – IAN “PETE” GEOGHEGAN FORD MUSTANG

1967 ATCC WINNER – IAN “PETE” GEOGHEGAN FORD MUSTANG

1967 ATCC WINNER – IAN “PETE” GEOGHEGAN FORD MUSTANG

This 1:18 scale model has been released and we have only one left.

Grab it now before it goes.

The model number is AC8002 and it is $295.

Produced in high quality sealed body resin, the 1:18 Mustang is a finely crafted collectable. Despite being a sealed body model, the interior detail has been well replicated and can clearly be seen through the clear windows. The exterior finishing of this model is a real standout also. The simple but very effective paint job and stripes works so well together and it will simply be a beautiful addition to any ones ATCC Winners collection.
As with all Biante/Apex 1:18 scale models, this model will come with a numbered Certificate of Authenticity. It will also come presented in closed box Apex Replicas packaging.
Overall this famous car of Australian motor racing is shaping up to be a real beauty and given it will be produced in a limited edition, it’s one that shouldn’t be missed.

2018 & 2019 Penrite Racing 1:18 Model Announcments

The following models have just been announced in 1:18 scale sealed body resin with clear windows and detailed interior and can be preordered now.

Preorders close Friday 25th October and a phone number is essential.

 

2018 Bathurst Pole Penrite Racing ZB Commodore Reynolds/Youlden

ACR18H18C $195
Preorder Now

1:18 Resin Model

2018 Bathurst Penrite Racing DePasquale/Brown

ACR18H18D $195
Preorder Now

1:18 Resin Model

2019 Penrite Racing ZB Commodore David Reynolds

ACR18H19A $195
Preorder Now

1:18 Resin Model

2019 Penrite Racing ZB Commodore Anton DePasquale

ACR18H19B $195
Preorder Now

1:18 Biante September New Announcements

These 1:18 model have just been announced and you can preorder now.

These models are due early 2020.

Please place your preorders using the links provided and also include your phone number.

Preorders close Saturday 14th September.

1:18 Resin Model

AR80610 $240

Preorder Now
FPV FG GT R-Spec
Vixen Red with black accents
(SEALED BODY RESIN)

The ‘R-Spec’ pack was introduced into the FPV range with the BF Mk2 model to give the already high performing an increase in handling and steering feel while not compromising road comfort. Running through the BF 40th Anniversay models plus the F67 Typhoon and the GT ‘Cobra’ the R-Spec package was highly popular with FPV owners and fans.
With the release of the FG model Falcon, Ford again produced a limited edition R-Spec model in special colour and stripe combinations. The hero colour was black with red accents and C stripe down both sides echoing the Ford Mustang Boss 302 Laguna Seca model from the USA. The FG R-Spec was also produced limited numbers in Kinetic Blue, Vixen, and Winter White.
Produced in sealed body resin with high details and immaculate finishing, this model will be a limited edition and comes with a numbered Certificate of Authenticity.

 

1:18 Resin Model

AR80612 $240

Preorder Now

FPV FG GT R-Spec
NSW Highway Patrol
(SEALED BODY RESIN)

The ‘R-Spec’ pack was introduced into the FPV range with the BF Mk2 model to give the already high performing an increase in handling and steering feel while not compromising road comfort. Running through the BF 40th Anniversay models plus the F67 Typhoon and the GT ‘Cobra’ the R-Spec package was highly popular with FPV owners and fans.
With the release of the FG model Falcon, Ford again produced a limited edition R-Spec model in special colour and stripe combinations. The hero colour was black with red accents and C stripe down both sides echoing the Ford Mustang Boss 302 Laguna Seca model from the USA. The FG R-Spec was also produced limited numbers in Kinetic Blue, Vixen, and Winter White.
To celebrate the 150th year of the NSW Police Force FG R-Spec serial number 150, in Winter White, was used by NSW Highway Patrol for pulic liason and awareness purposes across the state. Not content with the standard 335kw V8 engine, work was done on #150 to bring it up to a massive 400kw of power making it the most powerful highway patrol car that there ever had been up until that point,
Produced in sealed body resin with high details and immaculate finishing, this model will be a limited edition and comes with a numbered Certificate of Authenticity.

1:18 Diecast Model

A73466 $270

Preorder Now

Holden LX Torana Hatchback
Madiera red (FULLY OPENING DIECAST)

Produced in the Madiera Red with Black bonnet colour scheme, this is one of the best looking variations of the popular A9X muscle car. Produced in diecast with fully opening parts, detailed interior and engine bay, and immaculate finishing – this is a model for any Holden or Muscle Car enthusiast so don’t miss it.
Produced in fully opening diecast, this model will be set to an exclusive limited edition based on order numbers and will come with a numbered Certificate of Authenticity.

1:18 Diecast Model

B18501E $250

Preorder Now

Ford Sierra RS500
Moffat/Hansford
Winner, 1988 Sandown 500
(FULLY OPENING DIECAST)

Biante Model Cars are very pleased to present the 1:18 scale Ford Sierra RS500 that Allan Moffat and Gregg Hansford drove to victory in the 1988 Enzed Sandown 500
Dick Johnson took pole position for the event in his Shell Sierra with a time of 1:46.94 with Moffat’s ANZ Sierra starting the race in 7th position 4 seconds adrift. Come race end Moffat and Hansford had been able to bring their car up to the front and claim Allan’s 6th and final victory in the Sandown endurance race and Gregg’s only win. Adding extra significance to this win was that it was to be Allan’s final race victory on Australian soil with him stepping away from competitive race driving during the 1989 season.
Forming part of the Biante Allan Moffat Collection and being produced in fully opening diecast, this model will be set to an exclusive limited edition based on order numbers and will come with a numbered Certificate of Authenticity hand signed by Allan Moffat.

HSV E3 25TH ANNIVERSARY GTS HERON WHITE

HSV E3 25TH ANNIVERSARY GTS HERON WHITE

This 1:18 scale model has just been released and we have one left.

If you want one buy it here now.

BR18404D $195

Limited edition of 402.

Despite being a sealed body model, no shortcuts have been taken with replicating the interior of this model. Upon looking through the clear windows you can see a very high attention to detail right down to the 25th Anniversary seat trimmings, dashboard instrumentation and logos. You can even clearly see the HSV EDI logo on the start up screen such is the level of detail. Last but not least, the Heron White colour scheme simply looks phenomenal and finishes the model superbly well.

The 1:18 Scale E3 25th Anniversary GTS is a must have model for Holden and HSV fans alike. It will be produced in a limited edition number and will come with a numbered Certificate of Authenticity, don’t miss it.

Hurry, so you don’t miss out.